Headphone AdviceArticles

How to Put Earbuds in Pairing Mode

Pairing mode makes your earbuds visible to a new phone, laptop, or TV, and the steps are nearly the same on every pair.

Headphone Advice · November 15, 2026

To put earbuds in pairing mode, put them in the charging case, open the lid, and hold the button on the case or earbud until the light flashes. Then pick the earbuds from the Bluetooth list on your device. Exact timing differs by model, so check your manual if this does not work the first time.

Pairing mode is a short window where the earbuds announce themselves to nearby devices. Outside that window, they only try to reconnect to a device they already know. That is why a new phone cannot see earbuds that are already connected to an old one.

Steps to pair your earbuds

  1. Charge the earbuds. Low battery is a common cause of failed pairing. Put them in the case for a few minutes first.
  2. Turn off Bluetooth on your old device. If the earbuds auto-connect to your old phone, they will not show up as new on another device.
  3. Open the case with the earbuds inside. On many models, opening the lid wakes the earbuds. Some start pairing mode on their own the first time you use them.
  4. Hold the pairing button. This is usually a small button on the case, or a touch control on the earbud. Hold it for about three to five seconds. Some models need longer.
  5. Watch the light. A flashing light, often white or blue, usually means pairing mode is on. Some models play a tone instead. Your manual lists what the light means.
  6. Open Bluetooth settings on your device. Turn Bluetooth on and wait for a scan. Your earbuds should appear by model name.
  7. Tap the earbuds in the list. Confirm if the device asks. You should hear a tone or see the status change to Connected.
  8. Test it. Play any audio. If sound comes from the earbuds, you are done.

Most earbuds remember the device after this. Next time, open the case and they connect on their own.

How do I pair earbuds to iPhone?

Put the earbuds in pairing mode, then open Settings, tap Bluetooth, and select the earbuds from the list under Other Devices.

If Bluetooth is off, turn it on first. Keep the earbuds close to the phone, within a few inches, during the first pairing. Some brands also have their own app that can walk you through setup, but it is not required for basic sound.

Can earbuds pair with a laptop?

Yes. Any laptop with Bluetooth can pair with Bluetooth earbuds. Put the earbuds in pairing mode, then add a Bluetooth device in your laptop settings.

On Windows, open Settings, then Bluetooth and devices, then Add device. On a Mac, open System Settings and choose Bluetooth. After pairing, check that your laptop's sound output is set to the earbuds. Some laptops keep playing through the speakers until you change it.

Can earbuds connect to a TV?

Often yes, but it depends on the TV. Many newer smart TVs have Bluetooth built in. Older ones may not.

Look in the TV's sound or Bluetooth settings for a pairing option. If the TV has no Bluetooth, a small Bluetooth transmitter that plugs into the headphone or optical audio port is a common workaround. One thing to know: some setups add a slight delay between picture and sound. If speech looks out of sync, check the TV's audio delay setting.

Do Bluetooth headphones work with PS5?

Not directly in most cases. The PlayStation 5 does not accept standard Bluetooth audio headphones, so you typically need a USB adapter or a headset made for it.

Check Sony's support pages for your console before you buy anything. Wired headphones plugged into the controller are the simplest option and work with no setup.

Why won't my earbuds pair?

The usual causes are a low battery, a connection to another device, or an old pairing record. Work through the fixes below in order.

What can go wrong?

A few mistakes cause most pairing trouble.

If the earbuds still will not pair after a reset and a fresh start, the battery or hardware may be at fault. Check the warranty and contact the maker. For help with other basics, see how noise cancelling headphones work.

Next step

Want more plain answers about headphones and earbuds? Browse them all.

More headphone answers

Questions people ask

How long does pairing mode last?

It varies by model, but pairing mode often times out after a few minutes. If your device does not find the earbuds in time, repeat the steps to start pairing mode again.

Can earbuds pair with two devices?

Some models can stay connected to two devices at once, often called multipoint. Many cannot. Your manual says which one you have.

Do I need to pair every time?

No. After the first pairing, earbuds usually remember the device and reconnect when you open the case, as long as Bluetooth is on.

How do I reset earbuds?

The method depends on the brand. It is often a long press or several quick presses of the button with the earbuds in the case. Check your manual for exact steps.

More articles